Table of Contents
Advertisement
Prestige, Conquest, & Broadmoor Series
Adjustment
Procedures
Seat Adjustment
Pitch Adjustment
The pitch of the seat can be adjusted to one of three
positions. To adjust, remove the carriage bolts, spacers,
washers, and nuts (B, Figure 29) from the hinge and rein-
stall them in the desired holes.
Seat Slide Adjustment
The seat can also be adjusted forward and back. Move
the lever (A, Figure 28), position the seat as desired, and
release the lever to lock the seat into position.
Seat Spring Adjustment
The seat springs (C, Figure 29) can be adjusted to pro-
vide a softer or firmer ride. Tilt the seat forward and slide
the spring assembly (C) forward for a softer ride, and
back for a firmer ride.
Manual Lift Assist
Adjustment
(Manual lift models with large left-hand lift lever)
The manual lift assist spring tension can be adjusted to
compensate for the additional load of various attach-
ments.
1. Locate the adjustment bolt (A, Figure 30) at the lower
left corner of the engine compartment bulkhead.
2. Turn the bolt (A) clockwise to increase assist. Turn
the bolt (A) counterclockwise to decrease assist.
Cruise Control
Resistance Adjustment
Adjust the cruise lever tension if it will not stay engaged
or if it is too stiff.
1. Stop the tractor, shut off the PTO, turn off the engine,
and remove the key. DO NOT engage the parking
brake.
2. Locate the tension adjustment screw (A, Figure 31).
Turn the screw clockwise to increase tension on the
cruise lever. DO NOT over-tighten the screw. The
lever must be able to be returned to neutral by hand
or by depressing the brake pedal.
TP 300-2534-02-PR-SMA
C
A
Figure 29. Seat Adjustment
A. Seat Adjustment Lever
B. Carriage Bolt, Spacer, Washer, & Nut
C. Seat Spring
Figure 30. Manual Lift Assist Adjustment
A. Adjustment Bolt
Figure 31. Cruise Control Adjustment
A. Tension Adjustment Screw
14
B
A
Wheel Removed
for Clarity
A
1/2003
Hide quick links:
Advertisement
Table of Contents
