3-9) Unit & Pcb Box - Samsung RS757LHQESR/ Series Service Manual

FULL DISASSEMBLY AND ASSEMBLY
3-9) Unit & Pcb Box
Part Name How To Do
MACHINE ① Right figure displays the
COMPARTMENT Machine Compartment.
① Open the Assy-Grille and
remove Assy-cover comp.
ASSY-
② Remove gas struts from the
GRILLE, stud by loosening the clip of
GAS the strut with a screw driver.
SPRING ③ Unscrew two screws off the
gas struts and the other two
screws from the hinge.
① Disassemble Cover Grill,
disassemble the Housing of
DOOR
the switch.
SWITCH
② Disassemble the switch
pulling dow
① Pull out Housing connected
to the terminal block, second
remove 2 screws, third
disassemble ground wire and
finally pull out PCBBOX Cover.
② After opening PCB-BOX
PCB-BOX Cover, pull out Housing and
disassemble 4 screws to
remove SMPS.
③ Disassemble Main PCB from
PCB-BOX.
※ Main PCB should be fixed to
a hook like figure.
Descriptive Picture
28