Samsung RS757LHQESR/ Series Service Manual page 25

FULL DISASSEMBLY AND ASSEMBLY
Part Name How To Do
② After removing the housing
from the left wall and the
sensor housing on the upper
side, pull the evaporator
cover out as shown in the
photo.
③ Remove the fan motor
housing and the heater
housing, and pull the upper
duct out from the F-Room.
④ You can remove the flexible
pipe drain heater off the
evaporator after removing
the 2 screws and the power
cord housing indicated with
the arrow mark.
⑤ Pull the drain hose out, put
F-Room
it aside and remove the wire
Evaporator holder.
⑥ Remove the 2 screws that
hold the evaporator case,
and lower the evaporator
down slowly in order not to
have the flexible pipe bend.
⑦ Release the wire from its
retainer and pull the bottom
side of the evaporator cover
down as shown in the
photo.
⑧ Release the six retaining
hooks from both walls using
a flat-blade screwdriver and
take the front cover apart.
⑨ Turn the evaporator slowly
upside down so the flexible
pipes are kept in line.
① Refer to the F-Room
F-Room Evaporator Disassembly
Evaporator – loosen the 4 motor clamp
Fan Motor screws as shown in the right
Ass'y photo to remove the Motor
Ass'y.
Descriptive Picture
24