Samsung RS757LHQESR/ Series Service Manual page 20

FULL DISASSEMBLY AND ASSEMBLY
Part Name How To Do
① Loosen the one screw at
the bottom of display and
remove deco cover.
② Push (-)driver between
DISPENSER– display and assy case
DISPLAY ice route, pull out the
assy case ice route to
the front.
③ Disconnect the
connector.
① Disconnect the wires and
hoses from the assembly.
② Loosen the circled 2
DISPENSER– screws.
Ass'y COVER ③ Push the shown in two
ICE ROUTE
hook in the direction of
Inside, and pull out the
assy case ice route to
the front.
① Hold the lever as shown
in the picture.
DISPENSER–
② Squeeze your four
PUSH LEVER
fingers into the gap on
MICRO
the top right side and
SWITCH
pull it.
③ Disconnect Micro Switch.
Descriptive Picture
19