Casio LABEL IT! KL-BT User Manual page 37

● Labels don't stick
Probable Cause
The location or the material
is not suitable.
● Label margins too large
Probable Cause
The margin is set to "Large"
or "Medium".
● The "Printer not connected" error message appears
Probable Cause
No printer is selected.
● Can't connect to a smartphone
● The "Printer not found" error message appears
Probable Cause
The printer is not turned on. Press
Signal reception is poor.
The printer is in use.
Bluetooth is not enabled on
the smartphone.
Location information is not
enabled on the
smartphone.
None of the above
Required Action
Labels will not stick onto rough, gritty, wet, oily or
soiled surfaces.
(Page 31)
Required Action
Set the margin to "Small".
(Due to the construction of the printer, there is always
a margin at the top of the label during printing.)
Required Action
Locate and select a printer.
(Page 26)
Required Action
on the printer.
Move the printer to another location.
Try again.
Select ON in the Bluetooth settings.
Depending on your smartphone, you may need to
enable Bluetooth for each app.
Select ON in the location information settings.
Depending on your smartphone, you may need to
enable location information for each app.
Turn the printer off and then back on.
37