Table of Contents
Advertisement
3. Functions
3.4 Detergent drawer
Two compartments can be seen after opening the
drawer (Fig. 3-5):
1. Compartment 1: Power or Liquid detergent for
2. Compartment 2: Softener, Conditioning agent etc.
The recommendation on the type of detergents is
suitable for the various washing temperatures,
please refer the manual.
3.5 Function buttons
The function buttons(Fig. 3-6) enable additional
options in the selected programme before
programme starts. The related indicators are
displayed.
If a button has multiple options, the desired option
can be selected by touching the button sequentially.
Note: Factory settings
To get best results in each programme Haier has well defined specific default
settings. If there is no special requirement, default settings are recommended.
3.5.1-Function button "Delay"
Press this button (Fig.3-7) to start the programme with a
delay. End time delay could be increase in steps of 30
minutes from 0.5-24h. When you select the delay, the
total time will default longer than the programme run time.
For example, display off 6:30 means end of programme
cycle will be in 6 hours and 30 minutes. Press "Start/Pause"
button to activate the time delay.
3.5.2-Function button "Temp."
Press this button (Fig. 3-9) to change the washing
temperature of the programme. If no value is illuminated, the
water will not be heated.
programme.
Delay
12
1
2
S team
Temp.
S peed
Extra Rins e
S tart/P aus e
Delay
Temp.
3-5
3-6
3-7
3-8
Advertisement
Table of Contents
