BenQ LU935ST Manual page 8

Adjusting the projector position
Shifting the projection lens
Desk-front
projection
Ceiling mount-front
projection
V: Height of projected image
H: Width of projected image
• If you hear a "clicking sound" during the adjustment, it means that the knob is past its adjustment limit. Please
stop adjusting it, in order to avoid any unexpected damage, and turn the knob in the opposite direction, at least
to one step before the click.
• If you can't turn it back , please press and turn the knob back at same time.
To reach the highest or lowest projection position:
1. Turn (Up/Down).
2. When you feel it is reaching the limit, turn
(Left/Right) to the left or right and turn
again.
3. Repeat the step above until finding the suitable position you need.
• If you hear a "clicking sound" during the adjustment, it means that the knob is past its adjustment limit. Please
stop adjusting it, in order to avoid any unexpected damage, and turn the knob in the opposite direction, at least
to one step before the click.
• If you can't turn it back, please press and turn the knob back at same time.
10
Vertical shift
Max. 0.6V
1V
Max. 0.6V
Vertical shift
Max. 0.6V
1V
Max. 0.6V
Vertical shift
Effective projection position
Max.
0.23H
1H
Width of projected image
Shift to
left
Max.
0.23H
Shift to
right