BenQ LU935ST Manual page 5

• 12V TRIGGER
Trigger external devices such as an electric screen or
light control, etc.
Remote control
Numeric buttons
* This button is not available for this model.
Remote control ID setting
Sets the remote control ID for this remote control (between 01~99). After the projector ID is set, switch to the same ID for
the remote control to control the projector.
Setting the ID
1. Press and hold ID SET until the ID setting indicator lights up.
2. Enter the ID for the remote control (between 01~99). The remote control ID should be the same as the
corresponding projector ID. (Please set the corresponding projector ID in OSD.)
3. The ID is saved successfully when you see the ID setting indicator starts flickering and then blackout.
On
SOURCE
ASPECT
PICTURE
Up
Volume down
Left
OK
Keystone key
BACK
MENU
MUTE
ALL
ZOOM+
ZOOM-
• 3D VESA IN
Connection to a 3D enabled device.
• 3D VESA OUT
Connection to a 3D IR emitter.
ID setting indicator
Off
QUICK INSTALL
INFO
LIGHT SOURCE
Keystone key
Right
Volume up
Down
AUTO
BLANK
LIGHT
ID SET
No function*
3D
FREEZE
No function*
7