BenQ LU935ST Manual page 4

Product information
Shipping contents
Projector
Specifications
Display system
Resolution
Light source
Throw ratio
Power consumption
Dimensions
Weight
Control terminals
• REMOTE
For connection to a wired remote control.
• RS232
Standard 9-pin D-sub interface for connection to PC
control system and projector maintenance.
• USB TYPE A
Support 5V/1.5A output. (Power for
WDC10/QCast Mirror. Power for WDC20 should com
from external power supply.)
• LAN
For connection to RJ45 Cat5/Cat6 Ethernet cable to
control the projector through a network.
• HDBaseT
For connection to a HDBaseT transmitter via an
Ethernet cable (Cat5/Cat6) to input up to WUXGA
(1920 x 1200) timing, RS232 control signal and IR
control signal.
*The HDBaseT port does not support LAN control.
6
Remote control and
Installation guide
batteries
LU935
1-CHIP DMD
1920 (H) x 1200 (V)
Laser
1.36 ~ 2.18
495 W (Max); < 0.5 W (Standby)
416 mm (W) x 166 mm (H) x 351 mm (D)
6.3 Kg (13.0 lbs)
Power cord
LU935ST
0.81 ~ 0.89
• HDMI 1
Connection to HDMI source.
• HDMI 2
Connection to HDMI source.
• PC
15-pin VGA port for connection to RGB source or PC.
• MONITOR OUT
Connection to other display equipment for concurrent
playback display. (Used with PC port.)
• AUDIO IN
Connection to an audio input source via an audio cable.
(Used with PC port.)
• AUDIO OUT
Connection to a speaker or headset.
HDMI cable