Lamination Process - UNITED OFFICE ULG 300 B1 Operating Instructions And Safety Instructions

Lamination process

♦ Lay the laminating pouch on the pouch guide rail
edge of the laminating pouch onto the pouch format guide
to the front) .
♦ Push the pouch format guide
In this way, you will ensure that the pouch is not pulled in at an angle .
NOTE
► If, despite this, the pouch is pulled in at an angle, use the "Anti-blocking
function", as described in the section Anti­blocking function (ABS) .
♦ Now push the laminating pouch slowly into the slot for manual pouch
insertion
♦ When you have slid the pouch several centimetres into the slot for manual
pouch insertion
Release the pouch as soon as you notice that it is being pulled in automati-
cally .
CAUTION
► Ensure there is at least 45 cm of open space in front of the laminator .
Otherwise, the pouch will not be ejected completely from the laminator
after lamination . This could damage the pouch .
♦ The finished laminated pouch is ejected from the pouch slot
nator .
NOTE
Only after hot laminating: When the finished laminated pouch is
►
ejected from the pouch slot
change its shape . For this reason, let the laminated pouch cool down for a
minute before touching it .
► To improve the lamination result, you can weigh down a still hot laminated
pouch with a book, a file folder or any other heavy, flat object . This will
help ensure a smooth, perfect surface .
♦ If you are finished laminating, set the ON/OFF switch
♦ Remove the power plug from the mains power socket .
■ 58 │ GB │ MT
4
.
5
it will then be pulled in the rest of the way automatically .
5
0
. Lay the right or left
1
together until the desired format is reached .
of the laminator, it is hot and can easily
(closed side
4
of the lami-
0
to "OFF" (O) .
7
ULG 300 B1