Antenna Installation - Buffalo AirStation WBR2-G54 User Manual

Antenna Installation

The WBR2-G54 has two internal antennas. One has a
vertical orientation while the other has a horizontal orienta-
tion. This setup is ideal because it allows for proper antenna
polarization with both desktop and notebook style wireless
adapter antennas.
However, it may be necessary to increase your range further
by installing an external, higher-gain antenna. External
antennas come in all shapes and sizes. Antennas also
come with different connectors. The WHR2-G54 has an 'MC
Connector' on it. Thus, the antenna must also have an MC
connector.
To install the antenna, slide the antenna connector door on
the back of the WBR2-G54 to the right. This will expose the
MC Connector. Attaching the antenna is simple, just insert
the antenna's MC Connector into the WBR2-G54's MC Con-
nector and firmly push it in until it snaps into place. Once
snapped, the antenna's connector will swivel with ease. It is
important not to push the antenna connector in at an angle.
To remove the antenna, pull the antenna connector out. It is
important not to pull the antenna connector out at an angle.
13