Additional Information For Edge Troubleshooting - Nokia RA-2 Rf Description & Troubleshooting

RA-2/3
7 - RF Description and Troubleshooting

Additional information for EDGE troubleshooting

Note! EDGE mode troubleshooting differs slightly from basic GSM troubleshooting.
To start EDGE troubleshooting:
1. Initialize a connection to the phone (see GSM850/900/1800/1900 trouble-
shooting instructions).
2. To select a product in Phoenix:
From the File menu, choose "Choose Product "and select RA-2/RA-3 from the list
or
from the File menu, choose "Scan Product".
3. From the toolbar, set operating mode to "Local"
4. From the Testing menu, choose "RF Controls".
5. In the "RF Controls" window:
- Select Band "GSM850", "GSM900" or "GSM1800" or "GSM1900" (Default =
"GSM900" RH-30, Default= "GSM850" RH-31).
- Set Active unit to "Tx" (Default="Rx").
- Set Edge "On" (Default="Off").
- Set Operation mode to "Burst" (Default="Burst").
- Set Tx data type to "Alternate PN9" (Default="All1").
- Set Rx/Tx channel to 190 on GSM850, 37 on GSM900 or 700 on GSM1800 or
661 on GSM1900 (Defaults).
- Set power level to 8 (Default = 19) on GSM850 and GSM900 or to 2 (Default =
0) on GSM1800 or GSM1900.
Note! For GSM850/900 Edge power levels 5, 6 and 7 are not in use and for
GSM1800&1900 Edge power levels 0 and 1 are not in use.
Issue 1 09/04 COMPANY CONFIDENTIAL
Copyright © 2004 Nokia. All Rights Reserved.
Nokia Customer Care
35