Preset Memory; Checking The Preset Stations - Denon AVR-5803 Operating Instructions Manual

Preset memory

To operate the tuner by remote control, switch the remote control device to "TUNER".
1 Use the "Auto tuning" or "Manual tuning" operation to tune
in the station to be preset in the memory.
2 Press the MEMORY button.
(Remote control unit)
3 Remote control unit:
Press the SHIFT button and select the desired memory block
(A to E).
(Remote control unit)
4 Remote control unit:
Press the PRESET UP or DOWN button to select the desired
preset channel (1 to 8).
(Remote control unit)

Checking the preset stations

The preset broadcast stations can be checked on the on screen display.
1 Press the ON SCREEN button repeatedly until the "Tuner Preset Stations" screen appears on the
on screen display.
(Remote control unit)
5 Press the MEMORY button again to store the station in the
preset memory.
To preset other channels, repeat steps 2 to 5.
A total of 40 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to E.
1
4
2, 5
3
(Remote control unit)
67