Table of Contents
Advertisement
Press
repeatedly until
1.
play.
Press the
or
button.
2.
a The display shows the calculated end time.
3.
Use the
or
button to delay the end time.
a After a few seconds, the appliance applies the set-
ting and the display shows the set end time.
a Once the calculated start time has been reached,
the appliance starts heating up and the cooking
time starts counting down.
a When the cooking time has elapsed, a signal
sounds and the duration is at zero in the display.
When the cooking time has elapsed:
4.
Press any button to end the signal prematurely.
‒
To set another cooking time, press the
‒
When the dish is ready, switch off the appliance.
‒
Changing the end time
In order to achieve a good cooking result, you can only
change the set end time before operation starts and
the cooking time starts counting down.
is highlighted in the display.
Requirement:
9 Childproof lock
Secure the appliance to prevent children from accident-
ally switching it on or changing the settings.
Notes
¡ The option to set the childproof lock can be activ-
ated in the Basic settings .
¡ After a power cut, the childproof lock will no longer
be active.
10 Basic settings
You can configure the appliance to meet your needs.
10.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
Factory setting (may vary according to model)
1
is selected in the dis-
button.
Basic setting
Clock display
Signal duration upon completion of a
cooking time or timer period
Acoustic signal when a button is
pressed
Cooling fan run-on time
Use the
or
button to delay the end time.
▶
a The appliance applies the change after a few
seconds.
Cancelling the end time
You can delete the set end time at any time.
is highlighted in the display.
Requirement:
Reset the end time to the current time plus the set
▶
cooking time using the
a After a few seconds, the appliance applies the
change and starts heating up. The cooking time
counts down.
8.5 Setting the time
Once the appliance has been connected to the mains
or after a power cut, the time flashes in the display. The
time starts at "12:00". Set the current time.
Requirement: The function selector must be set to the
off
position.
Use
or
to set the time.
1.
Press
.
2.
a The time that is set appears in the display.
Tip: You can define whether the time is shown in the
display in the basic settings.
9.1 Activating and deactivating the
childproof lock
Requirement: The function selector must be set to the
off
position.
To activate the childproof lock, press and hold the
▶
button until
appears in the display.
To deactivate the childproof lock, press and hold
‒
the
button until
Selection
= hide the time
= display the time
= 10 seconds
= 30 seconds
= 2 minutes
= off
1
= on
= short
= medium
= long
= extra long
Childproof lock en
button.
goes out in the display.
1
1
1
11
Advertisement
Table of Contents
