Before Operating; Playing The Input Source - Denon AVR-1507 Operating Instructions Manual

ENGLISH
Easy Operation
INPUT SELECTOR INPUT MODE
<POWER> <ANALOG>
<SPEAKER> <EXT.IN>
<ON/STANDBY>
INPUT SELECTOR
[MODE SELECTOR 1]
INPUT SELECTOR
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit

Before operating

VOLUME
1
Turn on your subwoofer.
Set the volume to halfway and set the crossover frequency to
the maximum or Low pass filter off if your subwoofer can adjust
the output volume and the crossover frequency.
Some subwoofers have a standby mode. Be sure to turn this
function off before performing the Auto Setup procedure.
2
Turn on your monitor.
3 < POWER >
Press
[ON/SOURCE]
ON:
¢
The power indicator lights red.
OFF:
£
The power turns off and the indicator is off.
4
< ON/STANDBY >
Press
• The power indicator blinks green and the power turns on.
VOLUME
5 < SPEAKER >
Press
A, Front B or Front A+B).
6
[MODE SELECTOR 1]
Set
INPUT MODE
.
[ON/SOURCE]
or .
to select the front speaker (Front
to "AUDIO".
9
ENGLISH

Playing the input source

1
INPUT SELECTOR
Use to select the input source you
want to play.
2
INPUT MODE
Press .
AUTO PCM DTS
EXT. IN ANALOG
Press < ANALOG > to select "ANALOG", < EXT. IN > to select "EXT.
IN".
3 Start playback on the selected component.
For operating instructions, refer to the component's manual.
4 VOLUME
Use to adjust the volume.
• The volume level is displayed on the master volume level
display.
Easy Operation