Installation
Unscrew the angle trims from both
sides of the appliance door and place
the trims and screws to one side –
they will be required later.
Close the appliance door.
Measure the gap X between the
mounting frame and the upper edge
of the adjacent cabinet front.
38
Remove the nuts and washers
from the threaded bolts and store
them in a safe place – they will be re-
quired later.
Take the mounting frame off the
appliance door by removing it up-
wards.
Place the cabinet front on a firm sur-
face, with the external side facing
downwards (place on a blanket or
similar to avoid it becoming
scratched).
Mark the distance X -1/8" (3 mm) on
the inner side of the cabinet front.
Similarly, locate and mark the mid-
point Y on the cabinet front.