Miele F 2462 Vi Operating And Installation Instructions page 120

Frequently Asked Questions
Problems with the ice/water dispenser
Problem
The Ice/Water dis-
penser cannot be
switched on.
The ice/water dispenser
is not immediately
ready for operation af-
ter having been
switched on.
No ice cubes are dis-
pensed.
The chilled water from
the Ice/Water dispenser
does not taste good.
120
Possible cause and solution
The appliance is not connected to the power supply.
 Check that the appliance is connected to the elec-
tricity supply.
The system lock of the Ice/Water dispenser is active
(the  sensor control is highlighted in white).
 Switch off the system lock (see "Operating the Ice/
Water dispenser – Switching the system lock on/
off").
This is not a fault. After the appliance door has
opened and closed, it can take several seconds un-
til the ice/water dispenser is ready for operation.
The Ice/Water-dispenser spout is blocked by frozen
ice.
 Remove the ice that has clumped together.
 Empty the ice container at the latest if you have
not produced any ice for a week (see "Emptying
and cleaning the ice container" in "Cleaning and
care").
After the Ice/Water dispenser has been switched on,
it can take up to 24 hours until the first serving of ice
cubes is ready.
If you dispense chilled water again after a longer pe-
riod of time, it may be stale.
 In this case, pour out the first 15 glasses of water.