LG LDE4413ST Service Manual page 35

REASSEMBLY THE UPPER DOOR GLASS & HINGE RECEPTACLE
RESSEMBLY METHOD OF INNER DOOR
GLASS :
1. Insert one pane of glass in inner cover.
(Glass position : Surface printed with "단면LG"
should be placed on bottom.)
2. Insert the other pane of glass and install the
bracket on the glass.(Glass position same as step 1.)
RESSEMBLY NOTE : When you reinstall the
Insulation around the oven door glass, make sure
that the insulation is not visible in the glass after the
door is reassembled.
COMPONENT ACCESS
(For the Upper Door)
RESSEMBLY METHOD OF HINGE
RECEPTACLE :
1. Cover the inner cover with the door frame.
2. Pull up the bottom of the hinge receptacle to align
the hole with the hole in the frame, then insert
and tighten the bottom screw.
3. Move the inner cover and pull the top of the hinge
receptacle to align with the hole in the frame and
insert the second screw in the hinge receptacle.
4. The opposite hinge receptacle is assembled
using the same method.
3-18