Dell PowerEdge 6850 Information Update page 7

System and Status Messages
System Screen Messages
Table 1-1 provides an additional system message that your system may display on the screen.
See "System Messages" in your Installation and Troubleshooting Guide for information about
other system messages.
Table 1-1. System Messages
Line 1
Message
E1000
LCD Status Messages
Table 1-2 provides an updated list of system status messages that the system's front-panel LCD may
display at system startup if a memory error occurs. See "System Messages" in your Installation
and Troubleshooting Guide for additional information about system messages.
Table 1-2. LCD Status Messages
Line 1 Line 2
Message Message
SYSTEM SYSTEM NAME
ID
OVRFLW CHECK LOG LCD overflow message.
E0000
Line 2
Message
FAIL SAFE
Causes
SYSTEM ID is a unique name,
five characters or less, defined
by the user.
SYSTEM NAME is a unique
name, 16 characters or less,
defined by the user.
The system ID and name display
under the following conditions:
• The system is powered on.
• The power is off and active
POST errors are displayed.
A maximum of three error
messages can display sequentially
on the LCD. The fourth message
displays as the standard overflow
message.
Causes
Failsafe event.
Corrective Actions
This message is for information
only.
You can change the system ID
and name in the System Setup
program. See your User's Guide
for instructions.
Check the SEL for details
on the events.
Information Update
5