Table of Contents
Advertisement
Hinging
1. Hinge the leg rest on the front of the frame and swing
it forwards until it engages.
Angle adjustment
There are nine preset positions available for angle
adjustment.
1. Loosening the knob D and pull it up with one hand
while supporting the leg rest with your other hand.
2. Adjust into one of nine preset positions, downwards
the knob D into the desired position and firmly tighten
the knob.
Calf pad adjustment
The calf pad E swings away during transfers and has three
depth adjustment options.
Depth adjustment:
1. After loosening the fixing screw C adjust to the desired
depth and firmly tighten the fixing screw.
Invacare recommends that depth adjustment is carried out
by a qualified technician.
Foot plate adjustment
There are two different foot plates available.
•
Height adjustable foot plates
1. Loosening the fixing bolt B with 10 mm spanner.
2. Adjust into one of four preset positions and tighten
the fixing bolt (5 Nm) B into the desired position.
1637828-C
•
Height, depth and angle adjustable foot plates
1. Loosening the screw F with 5 mm Allen key.
2. Adjust into the depth and angle positions and
firmly tighten the screw (12 Nm) F into the desired
position.
Invacare recommends that foot plate adjustment is carried
out by a qualified technician.
To ensure a good position of the feet the heel strap
is attached to the leg rest support and adjustable by
hook and loop fasteners.
3.8 Anti-tipper
An anti-tipper prevents the wheelchair from tipping
backwards.
WARNING!
Risk of overturning
Anti-tippers that are incorrectly set or no longer
working can lead to overturning.
– Always check that the anti-tipper is working
before using the wheelchair and have it set
or readjusted by a qualified technician when
required.
– In some configurations, the static stability of
the wheelchair may be lower than 10°; Invacare
strongly recommends the use of anti-tipper
(available as an option).
Product Overview
17
Advertisement
Table of Contents
