Adding A Printer; Connecting A Parallel Printer - Dell Inspiron 7500 Setup Manual

support.dell.com
C H A P T E R 3
Using Hardware Devices
This chapter provides information and tips on using your computer hardware devices
(physical parts of a computer). It also includes general instructions for using a port
replicator. For more information on using hardware, see the system Help. See
"System Help" in Chapter 1 for instructions on accessing the system Help.
Many of the computer devices you might want to use or connect come with their
own instructions and/or software. Follow the device manufacturer's instructions when
connecting and using these devices.
CAUTION: For your personal safety and protection of your computer, always
turn off your computer and disconnect it from the electrical outlet before
attaching any devices.

Adding a Printer

This section provides instructions on how to prepare and add a parallel printer or a
Universal Serial Bus (USB) printer to the computer.
Preparing a Printer
See the documentation that came with the printer for any preparation procedures
that are recommended by its manufacturer. You may be instructed to perform the
following tasks:
•
Remove the manufacturer's shipping packaging
•
Install the toner or ink cartridge(s)
•
Align the toner or ink cartridge(s)
•
Load printer paper

Connecting a Parallel Printer

NOTICE: Use only a standard IEEE parallel cable measuring 3 meters
(10 feet) or less to connect the printer to the computer. Use of an IEEE-
compatible parallel cable may prevent the printer from operating properly.
Using Hardware Devices 3-1