Standard Settings
The system setup program contains the standard settings for your
computer.
NOTICE:
Unless you are an expert computer user, don't change the settings
for this program. Certain changes might make your computer work incorrectly.
System Setup Pages
The system setup pages display the current setup information and settings
for your computer. You can change settings that appear as white type on the
screen.
•
Page 1 displays system information, boot configuration, and docking
configuration settings.
•
Page 2 displays system security, hard drive password settings, and basic
device configuration settings.
•
Page 3 displays battery charge status.
•
Page 4 displays power management settings.
Viewing the System Setup Pages
Turn on (or restart) your computer.
1
When the Dell logo appears, press <F2> immediately.
2
If you wait too long and the Windows logo appears, continue to wait
until you see the Windows desktop. Then shut down your computer
(see page 16) and try again.
Contacting Dell
When you need to contact Dell, use the telephone numbers, codes, and
electronic addresses provided in the following table. If you need assistance
in determining which codes to use, contact a local or an international
operator.
HINT:
To see information
about a specific item on
the system setup page,
highlight the item and
refer to the Help area on
the screen.
HINT:
Toll-free numbers
are for use within the
country for which they are
listed.
71
Appendix