Recreating The Hibernate File (Windows 98 Only); Boot (Restart) Your Computer With The System Software Cd - Dell Inspiron 3800 Solution Manual

HINT:
Windows 2000
recreates the hibernate
file automatically, but you
must reenable it.
HINT:
Windows Me and
Windows 2000 recreate
the hibernate file
automatically.
HINT: If you install
additional memory, you
must delete the original
hibernate file before
recreating a new one.
46 So l vi n g Pro b l em s
When the Completing the Windows 2000 Setup Wizard window
16
appears, remove the CD from the drive, and then click Finish. The
computer automatically restarts.
NOTICE: Make sure that you reinstall the Intel
before
driver you reinstall any other drivers.
Reenable the hibernate file (see page 48).
17
Recreating the Hibernate File
(Windows 98 Only)
When hibernate mode is activated, all system data is stored in the hibernate
file on your hard drive. The hibernate file cannot be accessed by the
Windows operating system or application programs.
You must recreate the hibernate file if you perform any of the following
actions:
• Delete the hibernate file.
• Install a new hard drive.
• Reformat your hard drive.
• Install additional memory.

Boot (Restart) Your Computer With the System Software CD

Save and close any open files, exit any open programs, and shut down
1
the computer.
If the computer is connected (docked) to an advanced port replicator
2
(APR), undock it (see page 54).
Turn on the computer.
3
Press <F2> as soon as you see the Dell logo.
4
System setup screen Page 1 appears after a few seconds.
Press <Alt><p> to view Page 2.
5
®
Chip Set Update Utility