Advertisement
2. SET THE SPACING OF THE BOWL
After you install the tank, be careful to set the spacing of set
aside the length for carrier studs and tighten nut. The bowl on
wall according to the dimensions as shown. See Fig. #3.
3. ATTACH CONNECTION PIPE
1) Attach inlet pipe which set aside the length to the
concealed tank.
2) Attach outlet pipe to the toilet.
3) You may apply some lubricant to help connect smoothly.
See Fig. #4.
4) Please tilt the outlet pipe a little after it is installed to
prevent water storage.
Inlet
Fig.#4
1132463-T01-C
178
355
215
See Fig.#5.
Outlet
4
2.
NOTE: Please reserve 10mm space for
the nut strictly according to the
picture. Otherwise, it will greatly
affect the loading capacity of the
toilet.
10mm
320
Fig.#3
3
3.
1)
2)
3)
4)
1
-3-
Unit: mm
:
Carrier Stud
Nut
4
Fig.#5
5
3
5
Advertisement
