Managing The Device - D-Link DMS-1100-10TP Quick Installation Manual

F) Users may now connect the power cord (AC 100/240 V) to an electrical outlet.

Managing the Device

Management Options
The D-Link DMS-1100 Series Switch can be managed through any port by using the Web-based
Management.
Each switch must be assigned its own IP Address, which is used for communication with the Web-Based
Management or a SNMP network manager. The PC should have an IP address in the same subnet as the
switch. Each switch can allow up to four users to access the Web-Based Management concurrently.
Using Web-based Management
After a successful physical installation, you can configure the Switch, monitor the network status, and display
statistics using a web browser.
Supported Web Browsers
• Internet Explorer 7 or later version
• Google Chrome
• Firefox
• Safari
Connecting to the Switch
You will need the following equipment to begin the web configuration of your device:
1. A PC with a RJ-45 Ethernet connection
2. A standard Ethernet cable
Connect the Ethernet cable to any of the ports on the front panel of the switch and to the Ethernet port on the
PC.
6