Fahrenheit/Celsius; Hi | Lo Temperature/Humidity Records; Reset Hi | Lo Temperature/Humidity Records; Wind Cups Spinning Slow Or Not Spinning - La Crosse Technology 327-1417BW Faqs

 Enter the program menu to select in Fahrenheit (ºF) or Celsius (ºC).

HI | LO TEMPERATURE/HUMIDITY RECORDS

Press and release the TEMP button to view HI/LO, temperature and humidity
readings with time/date stamp. Press and release TEMP again to view the next
value.
• Outdoor temperature HIGH
• Outdoor temperature LOW
• Outdoor humidity HIGH
• Outdoor humidity LOW
• Indoor temperature HIGH
• Indoor temperature LOW
• Indoor humidity HIGH
• Indoor humidity LOW
• Feels like HIGH
• Feels like LOW
• Dew Point
Note: Dew Point Temperature is not time/date stamped.

RESET HI | LO TEMPERATURE/HUMIDITY RECORDS

 Press and release the TEMP button to view individual HI | LO readings.
 Hold the MINUS button for five seconds to reset each individual value.
 Individual readings will reset to current temperature, humidity, etc.

WIND CUPS SPINNING SLOW OR NOT SPINNING

 Check for debris or ice in cups.
 Check mounting location. Look for obstructions that prevent the wind from
reaching the sensor.
 In most cases, the wind sensor needs to be 4-6ft above the highest point on the
roof in order to clear nearby obstructions and read accurately.
 A 50-foot clearance in all directions is best.
 Push down firmly on the center of the cups to reseat them.
 Cups are replaceable.

Replace wind cups:

1. Loosen the screw on side of cups
2. Remove cups
3. Install new cups
4. Tighten screw
La Crosse Technology, Ltd.

FAHRENHEIT/CELSIUS

REPLACE WIND CUPS
Page 5