Speakers - HP EliteBook 840 G8 Maintenance And Service Manual

2. Use a tool (2) to release the battery from the computer (3).
Reverse this procedure to install the RTC battery.

Speakers

To remove the speakers, use this procedure and illustration.
Table 6-3 Speaker description and part number
Description
Speaker Kit
Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Disconnect the battery cable from the system board (see
Remove the speakers:
1. Disconnect the speaker cable from the system board (1).
2. Remove the cable between the speakers from the clips along the bottom of the battery (2).
46 Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page 33).
33).
Battery on page 43).
Spare part number
M07107-001