Infrared (Ir) Board - HP OMEN 15-en0000 Maintenance And Service Manual

Table 6-9 RJ-45 door description and part number
Description
RJ-45 door for use in models with GeForce GTX 1660Ti and RTX 2060 graphics cards
RJ-45 door for use in models with GeForce GTX 1650Ti graphics cards
Before removing the RJ-45 door, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the solid-state drives
4. Remove the battery (see
5. Remove the fans (see
6. Remove the system board (see
Remove the RJ-45 door:
1. Use a flat tool to push the tab on the inside-bottom of the door toward the outside of the system board
to release it (1).
2. Remove the door (2).
Reverse this procedure to install the RJ-45 door.

Infrared (IR) board

To remove the IR board, use this procedure and illustration.
(Preparation for disassembly on page
(Bottom cover on page
(Solid-state drive on page
Battery on page 37).
Fans on page 44).
System board on page
31).
32).
46).
Component replacement procedures
Spare part number
M00636-001
M00637-001
31).
49