Table of Contents
Advertisement
18
Replacing the Hard Drive
6. Carefully pick up the bottom panel with the hard drive, being mindful of the sharp edges of
the bottom panel. Slide the 2 pre-inserted screws into the locked position, then tighten the
screws. Insert and tighten the 2 remaining hard drive screws.
7. Connect the power and SATA cables to the hard drive.
8. Replace the top panel and the 6 bottom panel screws.
#LX400111; r. 3.0/56507/56507; en-US
86
Hide quick links:
Advertisement
Table of Contents
