Table of Contents
Advertisement
Setting the gas grill on the oven
Open the top cover, if available. Keep the top cover
1.
open for as long as the appliance is in operation.
Turn on the main gas supply to the appliance. Insert
2.
the plug into the socket. Open the oven door.
Insert the three lugs on the protecting plate into the
3.
three notches below the control panel.
Insert the protecting plate with the symbol in such a
way that the lugs lie completely in the notches.
Close the oven door so that it is as close as possible
4.
to the protecting place.
Push in the function selector and turn it clockwise to
5.
the grill setting
(
.
Keep the function selector pressed in and press the
6.
ignition button
at the same time.
8
Keep the function selector pushed in for 10 seconds so
that the safety pilot starts up.
Check whether the flame continues to light up. If the
7.
flame goes out again, repeat the process from step
5.
Once the food is cooked, switch off the function
8.
selector. Once the oven has cooled down, remove
the protecting plate.
Caution!
The gas grill only works when the protecting plate is
inserted.
Make sure that the protecting plate is correctly inserted.
Do not press the selector for longer than 15 seconds. If
the burner does not ignite within 15 seconds, wait at
least one minute before repeating the procedure.
In the event of the burner flames being accidentally
extinguished, turn off the burner control and do not
attempt to re-ignite the burner for at least one minute.
DCleaning
W ith good care and cleaning, your appliance will retain
C l e a n i n g
its appearance and remain fully functioning for a long
time to come. We will explain here how you should
correctly care for and clean your appliance.
Cleaning agents
Damage to the various different surfaces caused by
using the wrong cleaning agent can be avoided by
observing the following instructions.
When cleaning the hob do not use
undiluted washing-up liquid or dishwasher detergent,
■
scouring pads,
■
abrasive cleaning agents such as oven cleaner or
■
stain remover,
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
When cleaning the oven do not use
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
Wash new sponges thoroughly before first use.
:
Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
Zone
Cleaning agent
Stainless steel sur-
Hot soapy water:
faces*
Clean with a dish cloth and dry with a soft
cloth. On stainless steel surfaces, always wipe
(depending on appli-
parallel to the natural grain. Otherwise, you
ance model)
may scratch the surface. Remove patches and
splashes of limescale, grease, starch and albu-
min (e.g. egg white) immediately. Corrosion
can form under such patches and splashes.
Special care products suitable for hot stainless
steel surfaces are available from our after-
sales service and from specialist retailers.
Apply a thin layer of care product with a soft
cloth.
Enamel, painted, plas-
Hot soapy water:
tic and screen-printed
Clean with a dish cloth and dry with a soft
surfaces*
cloth. Do not use glass cleaner or glass scrap-
ers for cleaning.
(depending on appli-
ance model)
Control panel
Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. Do not use glass cleaner or glass scrap-
ers for cleaning.
* Optional (available for some appliances, depending on the appliance
model)
Cleaning
en
19
Advertisement
Table of Contents
