Husqvarna Automower 430XH Operator's Manual page 36

Accessories > Automower Connect >
GeoFence > New center point .
4. Push the OK button.
To set the GeoFence level of sensitivity
The higher level of GeoFence sensitivity, the
easier the alarm starts.
To get access to the menu
1. Do steps 1–3 in
on page 26 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Accessories > Automower Connect >
GeoFence .
3. Use the arrow buttons to select level of
GeoFence sensitivity.
4. Push the BACK button.
To use the SMS function
The SMS function sends you an SMS when the
product is moved out of the GeoFence.
To get access to the menu
1. Do steps 1–3 in
on page 26 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Accessories > Automower Connect >
Communication > Use SMS .
3. Push the OK button.
4. Use the arrow buttons and the OK button to
move through the menu structure
Accessories > Automower Connect >
Communication > SMS phone numbers .
5. Push the number buttons to enter the
telephone number with country code. For
example (+)46701234567.
6. Push the BACK button.
Note: There is a maximum of 10 SMS each
month from the product.
Network
APN settings
The product must specify APN settings to be able
to use and send data via the mobile net. Settings
for Husqvarna SIM is default.
3.12.13.3 Ultrasonic Automower
Ultrasonic function makes the product
The
decrease speed when the product comes near an
obstacle. The product operates at a lower speed
Ultrasonic function is disabled.
if the
36 - Installation
To set the Ultrasonic function
1.
2.
3.12.13.4 Headlights
To set the schedule for the headlights
1.
2.
3.
Note:
headlights at sunset and stop at midnight.
Evening & night will start the schedule for the
headlights at sunset and stop at sunrise.
To set the Flashes when fault function
The headlights flashes if the product stops to
operate because of a fault if
enabled.
1.
2.
3.
3.12.13.5 To avoid collisions with the mower
house
The wear on the product and the mower house
decreases when you select
mower .
1.
2.
®
450XH
Do steps 1–3 in To get access to the menu
on page 26 .
Use the arrow buttons and the OK button to
move through the menu structure
Accessories > Ultrasonic > Use .
Do steps 1–3 in To get access to the menu
on page 26 .
Use the arrow buttons and the OK button to
move through the menu structure
Accessories > Headlights > Schedule .
Always ON, Evening only,
Select between
Evening & night or Always OFF .
Evening only will start the schedule for the
Flashes when fault is
To get access to the menu
Do steps 1–3 in
on page 26 .
Use the arrow buttons and the OK button to
move through the menu structure
Accessories > Headlights > Flashes when
fault .
Use the OK button to enable or disable the
Flashes when fault function.
Avoid collisions with
To get access to the menu
Do steps 1–3 in
on page 26 .
Use the arrow buttons and the OK button to
move through the menu structure
Accessories > Mower house > Avoid
collisions with mower .
1230 - 002 - 30.03.2020