Husqvarna Automower 430XH Operator's Manual page 35
Robotic lawn mower
Hide thumbs
Also See for Automower 430XH:
- User manual ,
- Operator's manual (73 pages) ,
- Quick manual (8 pages)
Table of Contents
Advertisement
6.
Use the arrow buttons to set the date format
and then push the BACK button.
3.12.12.2 To set the language
To get access to the menu
1.
Do steps 1–3 in
on page 26 .
2.
Use the arrow buttons and the OK button to
move through the menu structure
General > Language.
3.
Use the arrow buttons to select language
and then push the BACK button.
3.12.12.3 To set the Country & Timezone
1.
Do steps 1–3 in
To get access to the menu
on page 26 .
2.
Use the arrow buttons and the OK button to
move through the menu structure
General > Country & Timezone.
3.
Use the arrow buttons to select country and
then push the BACK button.
3.12.12.4 To set the unit format
To get access to the menu
1.
Do steps 1–3 in
on page 26 .
2.
Use the arrow buttons and the OK button to
move through the menu structure
General > Unit format.
3.
Use the arrow buttons to select unit format
and then push the BACK button.
3.12.12.5 To reset all user settings
1.
Do steps 1–3 in
To get access to the menu
on page 26 .
2.
Use the arrow buttons and the OK button to
move through the menu structure
General > Reset all user settings .
3.
Use the right arrow button to select
with reset of all user settings?
4.
Push the OK button to reset all the user
settings.
Security level, PIN code, Loop signal,
Note:
Messages, Date & Time, Language and Country
settings are not reset.
3.12.12.6 The About menu
About menu displays information about the
The
product, for example serial number and firmware
versions.
1230 - 002 - 30.03.2020
3.12.13 Accessories
Settings for accessories mounted on
the product can be made in this menu.
3.12.13.1 Information
Settings >
This menu handles accessories mounted on the
product. Contact your local Husqvarna
representative for more information on available
accessories.
3.12.13.2 Automower
Automower
430XH/450XH.
To pair Automower
Settings >
1.
Do steps 1–3 in
on page 26 .
2.
Use the arrow buttons and the OK button to
move through the menu structure
Accessories > Automower
Pairing > New pairing .
3.
Follow the instructions in the app.
To enable the GeoFence function
GeoFence is a GPS-based theft protection that
Settings >
makes a virtual fence for the product. You will get
a message if the product is moved on the other
side of the GeoFence.
1.
Put the product in the center of the work
area.
2.
Do steps 1–3 in
on page 26 .
3.
Use the arrow buttons and the OK button to
Settings >
move through the menu structure
Accessories > Automower Connect >
Proceed
GeoFence > Activate GeoFence .
4.
Push the OK button.
5.
Select
button.
To set a new center point for the Geofence
function
1.
Put the product in the center of the work
area.
2.
Do steps 1–3 in
on page 26 .
3.
Use the arrow buttons and the OK button to
move through the menu structure
®
Connect
®
Connect is included in Automower
®
Connect and the product
To get access to the menu
®
Connect >
To get access to the menu
Activate GeoFence and push the OK
To get access to the menu
Installation - 35
®
Advertisement
Table of Contents
