Remote Activation Drawing; Ac Power Cord Retainer System - Atlas Power AP-S15RTHR Owner's Manual

AP-S15RTHR
Owner's Manual
AC Power Conditioner & Distribution Unit
Remote Activation Drawings

AC Power Cord Retainer System

Connect the IEC 14 Gauge 12' (4m) power cord to a 15A 120VAC outlet to provide power to the
AP-S15RTHR by aligning the pins of the cord to the pins on the chassis and inserting the cord.
Press firmly to assure a good connection. Remove the two screws from the chassis of the AP-
S15RTHR
The AP-S15RTHR incorporates an IEC power cord retainer bracket to prevent the cord from
coming loose. To install the IEC power cord retainer bracket, remove the two screws from the
chassis of the AP-S15RTHR, place the retainer bracket over the cord and insert the two screws
through the bracket into the chassis as illustrated below.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 9 – AtlasSound.com
Specifications are subject to change without notice.