Introduction - Atlas Power AP-S15RTHR Owner's Manual

AP-S15RTHR
Owner's Manual
AC Power Conditioner & Distribution Unit

Introduction

Thank you for purchasing the Atlas Power AP-S15RTHR AC Distribution and Suppressor Unit. The AP-S15RTHR has been designed to fit
into Atlas half width equipment racks. The AP-S15RTHR meets or exceeds most installation requirements for AC power distribution and
equipment power protection.
The AP-S15RTHR design offers power management control, remote activation, 24VDC 2000mA output, noise filtering, AC ground fault
indication, and six AC outlets making it the most compact, cost effective power management protection system on the market today.
The AP-S15RTHR features noise filtering for unwanted Radio Frequency Interference (RFI) that is commonly introduced into AC lines
by nearby radio transmitters or wireless products. EMI filters are incorporated to reduce noise and Electromagnetic Interference (EMI)
from such items as electric motors and external switching power supplies. The benefit of these filters can be seen on video products
and heard audibly by reduced static pops and external signal interference.
The AP-S15RTHR can be remotely activated by using dry contact closure or via a 5V – 24VDC voltage. Either method can be triggered
by using one of the optional Atlas WPD wall plate switches that feature a custom label area and remote status LED.
The AP-S15RTHR also features a 24VDC 2000mA DC output that works in conjunction with the switched AC Outlets. This 24VDC
output provides enough current to power several Time Saving Device (TSD) preamps, mixers or amplifiers reducing or eliminating the
need for external DC power supplies.
For fire alarm requirements an Emergency Power Down function or EPD can also be created by using the Remote Activation feature by
simply keeping the Remote Activation contact closed until a condition occurs that requires a system shut down. When the contacts are
opened, it will remove power from the switched outlets.
The AP-S15RTHR is unique by allowing you to select the power cord length that is required for the installation. A removable 12' IEC
power cord with a retainer bracket is supplied with the unit. If needed, a shorter or longer cord can be purchased separately to meet
installation requirements.
The AP-S15RTHR is designed to be mounted in a half width rack, but can also be rack mounted into 19" equipment racks by using the
optional PA702RMK kit. This kit allows you mount an AP-S15RTHR by itself or in conjunction with another Atlas half width rack product
such as the DPA-102PM, PA40G/PA60G, or MA40G/MA60G in a 19" 1RU space.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 5 – AtlasSound.com
Specifications are subject to change without notice.