Symptoms - Husqvarna AUTOMOWER 435X AWD Operator's Manual

Robotic lawn mowers
Hide thumbs Also See for AUTOMOWER 435X AWD:
Table of Contents

Advertisement

6.6 Symptoms

If your product does not work as expected, follow the symptoms guide below.
There is a FAQ (Frequently Asked Questions) on www.husqvarna.com which provides more detailed
answers to a number of standard questions. Contact your local Husqvarna representative if you still
cannot find the reason for the fault.
Symptoms
Cause
The product has
The boundary wire is not laid in a long
difficulty docking.
straight line that is far enough out from
the charging station.
The charging station is on a slope.
The product runs
The clock needs to be set.
at the wrong time.
The start and stop times for mowing
are incorrect.
The product vi-
Damaged blades lead to imbalance in
brates.
the cutting system.
Too many blades in the same position
lead to imbalance in the cutting system.
Different versions (thickness) of Husq-
varna blades are used.
The product runs,
The product searches for the charging
but the blade disc
station.
does not rotate.
The product mows
Grass or other foreign object blocks the
for shorter periods
blade disc.
than usual be-
The battery is spent.
tween charges.
Both the mowing
The battery is spent.
and charging times
are shorter than
usual.
56 - Troubleshooting
Action
Check that the charging station has
been installed according to the instruc-
To install the charging
tions. Refer to
station on page 26
Place the charging station on a surface
that is entirely level. Refer to
ine where to put the charging station on
page 20 .
Time & date on
Set the clock. Refer to
page 35 .
Reset the start time and change the
Schedule settings. Refer to Schedule
on page 31 .
Inspect the blades and screws and re-
place them if necessary. Refer to
place the blades on page 41 .
Check that only one blade is fitted at
each screw.
Check if the blades are of different ver-
sions.
No action. The blade disc does not ro-
tate when the product is searching for
the charging station.
Remove and clean the blade disc. Re-
Replace the blades on page 41 .
fer to
Replace the battery. Refer to
on page 44 .
Replace the battery. Refer to
on page 44 .
To exam-
Re-
Battery
Battery
1404 - 002 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents