Features Of The Control Panel - Danby DPAC9009 Owner's Use And Care Manual

OPERATION- Features of the Control Panel
Warning Light
KEY PAD FUNCTIONS
POWER SWITCH:Turns unit ON/OFF
MODE: Allows you to scroll through and
select desired operating mode.
FAN: Select from three different fan
settings; High, Medium, and Low.
AUTO-TIMER
AUTO-TIMER Adjust:
Auto off- With machine in running mode, press
timer button to set timer control. Press
buttons to select number of hours you
would like the unit to run before it automatically
shuts off.
Auto on- With machine in stand by mode,
press timer button to set timer control. Press
buttons to select number of hours before
the unit automatically starts running in air
conditionning mode.
NOTE: The time is adjustable between 1-24
hours.
TEMPERATURE Adjust:
• Used for adjusting the thermostat.
• The default display is room temperature.
• In cooling mode, when
button is pressed, the set temperature is
displayed and may be adjusted. After 15 seconds
the display will revert back to room temperature.
Temperature is only adjustable in cool mode.
NOTE: By pressing both
buttons at the same time for more
than 3 seconds, the display will
toggle between Celsius and
Fahrenheit.
Warning Light
Condensed water may accumulate in
the unit. If the internal tank becomes
full, the Warning signal in the LCD
Display will light up and the unit will not
operate until it has been drained.
LCD Display
Cooling Mode
Dehumidify Mode
Fan Only Mode
High Fan Speed
Medium Fan Speed
Low Fan Speed
Display Set Temperature
Display Timer Setting of Auto
Switch ON / OFF
Warning Light (the machine will
stop running)
6
Receiving Sensor