Setting The Timer; Setting A Standing Time - Panasonic Cyclonic Iverter NN-SN94JS Owner's Manual

Setting the Timer

1
This feature allows you to
program the oven as a kitchen
timer. Press Timer/Clock (Less)
once.
2
Set desired amount of time
using Number pads (up to 99
minutes, 99 seconds).
3
Press Start. The timer will count
down without cooking and
beep five times when done.
Caution: If oven lamp is lit
while using the timer feature
with door closed, the oven is
NOT set properly; STOP OVEN
IMMEDIATELY and re-read
instructions.
F0003BY70AP_02_20171208.indd 13
Operation (continued)

Setting a Standing Time

1
Some recipes call for a standing
time after cooking. Press Power
Level until the desired power
level appears in the display.
2
Set Cooking Time using the
Number pads (see previous
page for maximum times).
3
This feature allows you to
program the oven as a kitchen
timer. Press Timer/Clock (Less)
once.
4
Set desired amount of stand
time using Number pads (up
to 99 minutes, 99 seconds).
3
Press Start. The timer will start
and then beep twice at the end
of cooking time (the beginning
of standing time). Five beeps
will sound when standing time
is done.
13
Setting a Delayed
Start
1
The start time can be delayed
to start cooking at a later time.
To do this, first press Timer/
Clock (Less) once.
2
Enter the desired delay time
(up to 99 minutes, 99 seconds)
using the Number pads.
3
Press Power Level until the
desired power level appears in
the display.
Continued on the
Next Page
2017/12/8 15:02:27