Cooking; Keep Warm; Quick 30 - Panasonic Cyclonic Iverter NN-SN94JS Owner's Manual

Cooking

1
If cooking at high power (10),
skip to step 2. Press Power
Level until the desired power
level appears in the display.
P10 is the highest and P1 is the
lowest. P0 is the keep warm
feature.
Press Power Level
once P10 (HIGH)
twice P9
3 times P8
4 times P7 (MED-HIGH)
5 times P6 (MEDIUM)
6 times P5
7 times P4
8 times P3 (MED-LOW)/
DEFROST
9 times P2
10 times P1 (LOW)
11 times P0 (KEEP WARM)
2
Set Cooking Time using the
Number pads. P10 (HIGH) and
P0 (KEEP WARM) have max.
cooking time of 30 minutes. For
other power levels, the max.
time is 99 minutes, 99 seconds.
F0003BY70AP_02_20171208.indd 12
Operation (continued)
3
Press Start; the cooking will
start and the time will count
down in the display. At the
end of cooking, five beeps will
sound.
NOTES:
1. For reheating, use P10 (HIGH)
for liquids, P7 (MED-HIGH) for
most foods, and P6 (MEDIUM)
for dense foods.
2. For defrosting, use P3
(MED-LOW).
DO NOT OVERCOOK: This
oven requires less time to cook
than older units. Overcooking
will cause food to dry out and
may cause a fire. A microwave
oven's cooking power tells
you the amount of microwave
power available for cooking.
Stage Cooking:
For more than one stage of
cooking, repeat steps 1 and
2 for each stage of cooking
before pressing Start. The
maximum number of stages
for cooking is three. When
operating, two beeps will
sound between each stage.
Five beeps will sound at the
end of the entire sequence.
Automatic function (such
as frozen food, sensor cook
(reheat), popcorn, coffee/milk
and turbo defrost) can not be
used with 3 stage cooking.

Keep Warm

(Will keep food warm for up to
30 minutes after cooking)
1
Press Power Level 11 times to
select the P0 (KEEP WARM).
2
Set warming time using
Number pads (up to
30 minutes). This example
shows two minutes.
3
Press Start; the cooking will start
and the time will count down
in the display. At the end of
cooking, five beeps will sound.
NOTES:
P0 (KEEP WARM) can be set as
the final stage after cook time
has been manually entered. It
cannot be used with Automatic
function (such as frozen food,
sensor cook (reheat), popcorn,
coffee/milk and turbo defrost).
12

Quick 30

(Set or add cooking time in
30 seconds increments)
1
Press Quick 30 (More) until the
desired cooking time (up to
5 minutes) appears in the
display. Power Level is pre-set
at P10.
2
Press Start; the cooking will
start and the time will count
down in the display. At the
end of cooking, five beeps will
sound.
NOTES:
1. If desired, you can use
other power levels. Select
desired power level before
pressing Quick 30 (More).
2. After setting the time by
Quick 30 (More) pad, you
cannot use the Number
Pads.
3. Quick 30 (More) pad can
also be used to add more
time during manual
cooking.
4. It cannot be used with
Automatic function (such
as frozen food, sensor cook
(reheat), popcorn, coffee/
milk and turbo defrost).
2017/12/8 15:02:27