Miele KM 7678 FR Operating And Installation Instructions page 51

Problem
The Booster has
automatically switched
off early.
An area is not working
in the usual way on the
power level selected.
In comparable cooking
and frying processes
there are slight
differences in cooking
durations and browning.
The food in the pan
hardly heats up or does
not heat up at all when
the Auto heat-up
function is switched on.
A noise can be heard
after the appliance is
switched off.
 flashes alternately
with  in the timer
display and a tone is
sounding.
Possible cause and remedy
The overheating protection mechanism has been
activated.
 See "Safety features - Overheating protection".
The overheating protection mechanism has been
activated.
 See "Safety features - Overheating protection".
This is not a fault.
The pan base material and the positions of the pans
on the cooktop affect the power of the induction
coils. This in turn affects the cooking behaviour.
There is too much food in the pan.
 Start cooking at the highest power level and then
turn down to a lower one manually later on.
The pan is not conducting heat properly.
 Use a different pan which is better able to conduct
heat.
The fan will continue running until the cooktop has
cooled down. It will then switch itself off
automatically.
The cooktop is incorrectly connected.
 Disconnect the cooktop from the mains electricity
supply.
 Contact Miele. The cooktop must be connected to
the mains electricity supply according to the wiring
diagram.
Problem solving guide
51