Wipe Protection; Demonstration/Showroom Mode - Miele KM 7678 FR Operating And Installation Instructions

Additional functions

Wipe protection

The cooktop sensors can be locked
for 20 seconds in order, for example,
to remove soiling. The  sensor
control is not locked.
Activating
 Touch the  sensor.
The time counts down in the timer
display.
Deactivating
 Touch the  sensor control until the
timer display goes out.
Demonstration/Showroom
mode
These functions enable the cooktop to
be demonstrated in showrooms without
heating up.
Activating/Deactivating the
demonstration mode
When this mode is set, the cooktop
can be operated as normal.
 Switch the cooktop on.
 Place an induction-compatible pan
on the cooktop.
 Touch and hold the 0 and 2 sensor
controls on the numerical keybank at
the same time for 6 seconds.
In the timer display,  flashes
alternately with  (demonstration mode
activated) or  (demonstration mode
deactivated) for a few seconds.
38
Activating/Deactivating showroom
mode
In showroom mode, cooking
processes are simulated in an infinite
loop. The sequence of the individual
steps is repeated after 1 minute. If you
touch a sensor or put pans on the
cooktop, it switches to demonstration
mode.
 Switch the cooktop on.
 Place an induction-compatible pan
on the cooktop.
 Touch and hold the 0 and 8 sensor
controls on the numerical keybank at
the same time for 6 seconds.
In the timer display,  flashes
alternately with  (showroom mode
activated) or  (showroom mode
deactivated) for a few seconds.