Python 1600XP Owner's Manual page 22

4. Once the vehicle has started, it will run for the pre-program-
med period of time (either 12, 24, or 60 minutes - see
Programming Options section of this guide) or until a shut-
down input is triggered.
i i m m p p o o r r t t a a n n t t ! ! It is unsafe to operate a vehicle's motor in a
garage or other closed off area. Breathing the exhaust
from the vehicle is hazardous to your health. Never acti-
vate the remote start in an enclosed space.
When you are ready to drive the vehicle:
note: If the brake pedal is pressed before the key is in the
ON position, the engine will shut down.
While the vehicle is running during remote start operation, the
system will monitor the vehicle and will automatically shut down
the engine if the system receives any of the following shut-down
inputs:
➤ The brake pedal is pressed.
➤
The hood is opened.
➤
The shutdown toggle switch is put into the OFF position.
➤
The pre-programmed run time (12, 24, or 60 minutes) has
elapsed.
➤ Transmitter buttons
© 2005 directed electronics—all rights reser ved
1. Insert the ignition key and turn
it to the ON (not START) posi-
tion.
2. Press the brake pedal.
is pressed twice within 3 seconds.
19