Clifford IntelliGuard Millennia Owner's Manual page 13

re-enter your new PIN code. If the LED flashes on, your new code has been accepted. If the LED does not light, the two
codes did not match and the system has reverted to your previous code.
NOTE 5: The timer starts when you select this feature. When the duration you wish has been reached, press the blank
button on the PlainView 2 valet switch (you'll hear 2-chirps)
NOTE 6: Lets you arm/disarm with a new companion remote control or ANY remote (including 5-button master type)
of a Clifford G4 system on your other vehicle(s). For instance, to set button ✱ of the other car 's companion remote to
arm and disarm your IntelliGuard Millennia, select column 4, row 1, then press button ✱ of the other vehicle's remote
(you'll hear one chirp). Immediately press button ✱ a second time (you will hear a 2-chirp confirmation). Button ✱ of
the other vehicle's remote will now arm/disarm your IntelliGuard Millennia on this vehicle.
NOTE 7: The features in this column allow you to control your system with the remote control of a G4 system on your
other vehicle(s). Just select the function you wish, then press the unused button or button combination on the other
remote that you want to use to perform that function on this system (you will then hear the chirps noted). NOTE: You
must first set a button or button combination on the other car's remote that will arm/disarm the system (column 4, row
1) before these others will be accepted.
Clifford vehicle security systems and accessories require professional installation by an Authorized Clifford Dealer. Unless the system is sold and installed by an
Authorized Clifford Dealer, all product warranties and guarantees are void. (UK: This does not affect your statutory rights.) As the manufacturer, Clifford
Electronics warrants to the original consumer purchaser, the system control unit and remote controls to be free from defects in material and workmanship for as
long as you own the vehicle in which the system was originally installed. All other parts of the system and accessories to the system are warranted to be free from
defects in material and workmanship for one (1) year from the date of purchase. Clifford Electronics will repair or replace, at its option and free of charge during
the warranty period, any system component that proves defective in material or workmanship under normal installation, use, and service, provided the product
is returned to our factory by an Authorized Clifford Dealer, transportation charges prepaid. Products returned to our factory must be accompanied by a
photocopy of the purchase receipt. In the absence of such purchase receipt, the warranty period shall be one (1) year from the date of manufacture. Any damage
to the product(s) as a result of misuse, abuse, neglect, accident, incorrect wiring, improper installation, destruction or alteration of the serial number, repair or
alteration outside our factory, or any use violative of instructions furnished by us will void the warranty. This warranty is limited to defective parts and
specifically excludes any incidental or consequential damages connected therewith. This warranty is not transferable. Clifford Electronics makes no warranty
against theft. This warranty is not to be construed as an insurance policy against loss. Warranty on installation labor, removal and reinstallation charges are not
the responsibility of Clifford Electronics, Inc.
Lifetime limited factory warranty terms & conditions