Table of Contents
Advertisement
Place the assembled cover into
the gap above the appliance so it
clicks into place. While doing so,
slide both parts of the cover together
as required.
Building in the appliance
Mounting the cover in a side-by-side
combination
Insert the joining peg (from the side-
by-side kit) halfway into the channel
in the cover for the left-hand appli-
ance.
Place the second cover onto the pin
and press the two covers together.
Click the two covers together into the
niche above the appliance.
Fit the two plastic covers on both
sides of the appliance door by click-
ing them into the gap between the
appliance door and the cabinet door,
starting at the bottom and working up
to the top.
45
Advertisement
Table of Contents
