Table of Contents
Advertisement
To disarm the security system,
turn the ignition to the ON posi-
tion. Press the Valet button the
preset number of times (one to
five times) within five seconds.
The factory preset is one. After
five seconds, the system will
disarm. If the system does not
disarm, you may have waited too
long; turn the ignition off and on
and try again.
Location of Valet Button_________________________________
Number of Presses_____________________________________
important! The Valet
respond to 1-5 presses for the disarm function. You must
check with the installer to verify the programming for
your individual unit.
© 2003 directed electronics, inc.
DRW-35
switch can be programmed to
®
27
Advertisement
Table of Contents
