Product Status Messages - Epson WorkForce WF-2850 User Manual

Parent topic:

Product Status Messages

You can often diagnose problems with your product by checking the messages on its LCD screen.
Note: If the screen is dark, press the screen to wake the product from sleep mode.
LCD screen message
Printer Error. Turn on the printer
again. See your documentation for
more details
You need to replace ink cartridge
The printer's borderless printing ink
pad is nearing the end of its service
life. It is not a user replaceable part.
Please contact Epson support.
The printer's borderless printing ink
pad has reached the end of its
service life. It is not a user
replaceable part. Please contact
Epson support.
Paper Setup Auto Display is set to
Off. Some features may not be
available. For details, see your
documentation.
No dial tone is detected.
The combination of the IP address
and the subnet mask is invalid. See
your documentation for more details.
Solving Problems
Condition/solution
Turn the product off and then back on again. If the error persists,
check for and remove any jammed paper or protective materials
from the product. If the error still persists, contact Epson for
support.
Replace the indicated ink cartridges.
The ink pad is near the end of its service life and the message
will be displayed until the ink pad is replaced. Contact Epson for
support. (To resume printing, select Dismiss.)
The ink pad is at the end of its service life. Borderless printing is
not available. Turn off the product and contact Epson for
support.
AirPrint is not available when the Paper Setup Auto Display
setting is disabled. Change the Paper Setup Auto Display
setting to On.
Make sure the phone cable is connected correctly and the
phone line works. If you connected the product to a PBX (Private
Branch Exchange) phone line or Terminal Adapter, change the
Line Type setting to PBX. If you still cannot send a fax, turn off
the Dial Tone Detection setting. (Turning off the Dial Tone
Detection setting may cause the product to drop the first digit of
a fax number.)
There is a problem with the network connection to your product.
Set up your product on the network again.
233