Mounting Bracket Installation - Honeywell RIO Manual

4. Loosen all four mounting bracket screws. Remove
the two mounting bracket screws and washers from
the round holes of canopy. Set aside for later use.
Detach mounting bracket from canopy (Fig. 4).
Mounting Bracket
Screw
5. Secure the mounting bracket to the outlet box using
screws and washers provided with the outlet box
(not included) (Fig. 5).
Note: It is very important that you use proper hardware
when installing the mounting bracket as it supports
the fan.
Important: If using the angle mount, ensure that the
open end of the mounting bracket is installed facing
the peak of the ceiling.

MOUNTING BRACKET INSTALLATION

Washer
Fig. 4
Fig. 5
6
Mounting Mounting
Bracket Bracket
Screws
Washer
Canopy