Mounting Bracket Installation; Canopy - Honeywell 50206 Manual

4. Loosen the four mounting bracket screws. Remove
the two mounting bracket screws from the round
holes of canopy. Set aside for later use. Detach
mounting bracket from canopy (Fig. 4).
Mounting Washer
Bracket Screw
5. Secure the mounting bracket to the outlet box using
screws and washers provided with the outlet box
(not included) (Fig. 5).
Note: It is very important that you use proper hardware
when installing the mounting bracket as it supports
the fan.
Important: If using the angle mount, ensure that the
open end of the mounting bracket is installed facing
the peak of the ceiling.

MOUNTING BRACKET INSTALLATION

Fig. 4
Fig. 5
6
Mounting Mounting
Bracket Bracket
Screws
Washer

Canopy