Pairing With Lex Handheld; Responder Alert Sensors - Motorola APX 7000 User Manual

6875945M01-NL
Advanced Features
Procedure:
1 or to BT. Press the Menu Select button directly below BT to access the Bluetooth feature
screen.
2 or to Friendly name and press the Menu Select button directly below Edit.
A blinking cursor appears in the Friendly Name screen.
3 Use the keypad to edit the text.
4 Perform one of the following actions.
• Press the Menu Select button directly below Ok to save the new Friendly Name and return to
the Bluetooth feature screen.
• Press the Menu Select button directly below Cncl to return to the Bluetooth feature screen.
2.22.15

Pairing with LEX Handheld

Prerequisites: Ensure that Bluetooth feature of your radio is on and the Bluetooth tones are enabled.
Procedure:
1 Turn on the handheld and activate the Bluetooth feature.
2 Place the handheld close to the radio aligning the Bluetooth Pairing Location on the handheld
with the Bluetooth Pairing Location on the radio.
If the pairing process is successful, you hear an incremental-pitched tone from the radio. The
radio begins to connect to the handheld. If the connecting process is successful, you hear an
incremental-pitched tone. The display shows <Device Friendly Name> connected, and
the Bluetooth icon turns from
If unsuccessful, one of the following scenarios occur:
• You hear a short, low-pitched tone and the display shows Bluetooth pairing failed (if
pairing fails).
• You hear a decremental-pitched tone and the display shows <Device Friendly Name>
unpaired (if the connection fails within 6 seconds).
• You hear a short, low-pitched tone and the display shows <Device Friendly Name>
connect failed (if the radio has the pairing record of the handheld and the connection
fails).
Repeat this step to re-initiate the pairing process.
NOTICE: To unpair the handheld after a successful connection, follow the steps in
Viewing and Clearing the Bluetooth Device Information on page
2.22.16

Responder Alert Sensors

Responder alert sensors allow the radio to send over-the-air (OTA) notification when the radio receives
the holster sensor event.
To enable the feature, ensure that the GPS, Enhanced Data, and Bluetooth feature of your radio is on
and the radio supports Bluetooth Low Energy (BT-LE).
138
to .
136.