Miele H 7164 B Operating And Installation Instructions page 79

You can interrupt and resume the
intake process at any time by
selecting OK.
The amount of solution specified may
exceed the amount which is actually
taken in. Some of the solution may
therefore be left in the container at the
end of descaling.
A message will appear to confirm that
the intake process is complete.
 Confirm with OK.
The activation phase will begin. You
can watch the time counting down in
the display.
 Leave the container in the oven with
the tube still connected to the water
intake pipe. Top the container up with
approx. 300 ml of water, as the
system will need to draw in some
more liquid during the activation
phase.
The system will take in more liquid at
approximately 5 minute intervals. You
will hear the noise of the pump.
The interior lighting and cooling fan
remain switched on for the whole
duration of the process.
At the end of the activation phase a
buzzer will sound.
Cleaning and care
Rinsing the steam injection system
after the activation phase
After the activation phase the steam
injection system must be rinsed out to
remove residues of descaling solution.
To do this approx. 1 litre of fresh tap
water is pumped through the steam
injection system three times and is
collected in the universal tray.
 Take the universal tray with the
collected descaling agent out of the
oven and empty it. Place the tray
back in the oven again on the top
shelf level.
 Remove the plastic tube from the
container.
 Remove the container, rinse it out
thoroughly and fill it with approx.
1 litre of fresh tap water.
 Replace the container in the oven
compartment and secure the plastic
tube in the container.
 Confirm with OK.
The intake process for the first rinse
will start.
The water is fed through the steam
injection system and is collected in the
universal tray.
Instructions for preparing the second
rinse will appear.
 Take the universal tray with the
collected rinse water out of the oven
and empty it. Place the tray back in
the oven again on the top shelf level.
 Remove the plastic tube from the
container and fill it with approx. 1 litre
of fresh tap water.
79