D-Link WDA-2320 RangeBooster G User Manual page 28

Section 4 - Wireless Security
It is recommended to enable WEP on your wireless router or access point before configuring your wireless adapter. make sure you
enter the WEP key exactly the same on all wireless devices. It is strongly recommended to set the authentication to Shared Key.
1. Open the Wireless Utility by double-clicking on the D-Link icon in your system tray (lower-right corner of screen). Click on New
to create a new profile or highlight an existing profile and click Modify.
2. Select WEP under Set Security Option.
3. Select Shared and then select the Key Length from the
drop-down menu.
4. Enter the WEP key exactly as it is on your wireless router or access
point.
5. Click OK to connect to the network. Allow up to 30 seconds to
connect.
D-Link WDA-30 User Manual 8